
Artist Signature
TONE TUBBY™ 2×12″ Ovalback Cabinet
Hemp-cone Alnico Red × 2
The 212 TONEBY RED ITARU Signature is a 2×12 ovalback cabinet capture loaded with two Tone Tubby™ Alnico Red drivers — described by Tone Tubby as "the original Tone Tubby" and "the favorite of Carlos Santana and many others."
The hemp cone
Hemp fiber cones are more durable than paper, bringing the heat and tear resistance that paper cones lack. Tone Tubby describes the sound as "rich and smooth, unheard of from paper cone speakers" — voiced by the Alnico Red with silky rolled-off highs, a midrange with ample clean headroom, and a rock-solid bottom end at 50 watts per driver — the voicing that shapes this Itaru signature capture.
BASED ON
TONE TUBBY™ 2 × 12″ Ovalback Cabinet
Open oval back · 29 × 11 × 20 in
SPEAKER
Tone Tubby™ Alnico Red × 2
12″ Hemp cone · Alnico magnet · 50 W · 95–5000 Hz
Speaker Details
- ConeHemp fiber
- MagnetAlnico
- Frequency95–5000 Hz
- Configuration2 × 12″ Ovalback
Included IR Files
5 Single Mic IRs + 50 Mixed Mic IRs
— Available in 96 kHz / 48 kHz / 44.1 kHz
— Available in 96 kHz / 48 kHz / 44.1 kHz
Microphones Used

VR1 = sE Electronics™ VR1
Ribbon microphone with warm, smooth low-mids. Tames harshness and adds a vintage-tape character.

57III = Shure™ SM57 Unidyne III
The most-used dynamic mic in rock history. Tight, punchy midrange — the standard close-mic on guitar cabs since the 1960s.

906 = Sennheiser™ e906
Modern dynamic with flat-design body — sits flush against the grill. Tight midrange focus, easy to position.

M421 = Sennheiser™ MD421
Large dynamic mic with detailed response and bold low-end. A studio standard on guitar cabs and toms.

BACK = Sennheiser™ MD421 (back-of-cab)
Sennheiser MD421 placed at the back of the cabinet. Captures low-end weight and rear-speaker resonance.




![410 FEND '65-SR | '65 Fender™ Super Reverb [Black Face] | '65 CTS™ 4×10″ | Cabinet Impulse Response](http://tacosounds.com/cdn/shop/files/410-fend-65-sr_main.jpg?v=1777550872&width=100)


